June 20, 2018

Rustic Restoration Table

Hey friends! This week we are in Eugene, Oregon. The northwest is finally warming up, guys! I am one happy camper. We live so much of our lives outside, traveling around the US like this, so the warm weather gives us our playground back. Back to projects! Yay! We launched a new wood stain color a while back, but I finally have some photos to share! This stain is Restoration and it  will turn most wood types a warm, rustic brown.



1] SAND: To achieve this look, start with a raw wood surface.
The wood must be sanded, you can have it sent through a large sanding machine at the mill or you can sand it really well with a hand sander. You should start with 80 grit and then 120 grit. (You can do a finish sand at the end, at 220 or above.)

2] STAIN: Applying the Restoration stain is like a piece of cake, read "even easier than typical stains." 
Using a large brush and drench the wood with stain. (See above video, also shown on oak.) Let the wood air dry for 60 minutes.

3] DARKEN: Applying the Weatherwood Clear Maintenance Oil application is just like your typical wood stain application. You brush or wipe it onto wood, allow 5-10 minutes for it to penetrate, then wipe of excess.
Allow to cure 48 hours.

4.] SEAL: If your project is on a high traffic or water area, you will want to let the OIL cure for 48 hours, then seal overtop with 2-3 coats of Weatherwood Varnish, allowing 30 minutes between coats.

The texture on this oak just makes the color POP, don't you think? This stain will turn most wood species this shade.
Where have you been lately and how's that weather? 

Follow on Bloglovin
 photo signature7-2.jpg

No comments:

Post a Comment

Thoughts? Questions? Opinions? Let's talk about it!