August 16, 2017

Sliding Reclaimed Gray Doors


Hey guys- you're gonna love what I have for you this week. This tutorial can save you major bucks, if you want to buy a door stained like this, it would cost you around 2-3K! I'll show you how to turn any alder, sliding barndoor from Home Depot into a gorgeous, custom masterpiece.


Materials




Directions



1.] SAND (SORT OF): Normally, I'd say you should sand wood and with 80 grit sandpaper, but for projects that have intricate carving you'll want to use something else. You can purchase denatured alcohol, it's inexpensive and faster than sanding. Apply it like you would stain, with a spray gun or paint brush. Make sure to the wood the day before you plan to stain, so it can completely dry. 


Once you're wood is dry, which takes about 30 minutes, you're ready to move to the next step. You will see the before and after transformation of raw alder to Reclamation stained below. 


Then you want to decide if you like the color as is, in which case just seal it with Weatherwood Varnish. If you want to lighten it, you'll want to use Weatherwood's WHITE Maintenance Oil Topcoat, LEFT. However, if you want to darken it, and enhance the warmth of the wood tone, then use  Weatherwood's CLEAR Maintenance Oil Topcoat (RIGHT).


2.] STAIN: If you want a pure driftwood gray, you should use Reclamation. If you want a brown with brown in it, use Salvage. Using a wide brush, roller, or sponge brush, apply heavy coat of stain. Like in the above video, the wood will absorb the stain as it dries. The color will change from raw wood to stained. 

3.] LIGHTEN: We decided to lighten the wood, so we used White Maintenance Oil Topcoat. This will lock in that light driftwood look and protect the wood. It's a brush or wipe on application, brushing is faster but a rag will make the product go further.


Allow the oil to penetrate for 5-10 minutes. The longer it sits, the whiter the effect. The use a clean rag to wipe off. If it gets too pale, just buff the finish back down. The White Maintenance Oil will provide light to medium wood protection. 

4.] SEAL: Depending on your project! If you need heavy duty wood protection, you will want to use Weatherwood Varnish over the cured oils. If it's a cabinet or something, that will need the varnish!



These doors sold instantly to a cute gal who was buying a new home. I wish I had an after, after pic, but this still gives you an idea what is possible. If you're really loving this color and you'd like another project idea, check out this:

Awesome DIY Restoration Hardware Reclaimed Gray Oak Finish Tutorial and Video#fg2b

Questions, comments? Leave'em below!
-xoxo-

Follow on Bloglovin
 photo signature7-2.jpg

No comments:

Post a Comment

Thoughts? Questions? Opinions? Let's talk about it!

09 10 11 12
Blogging tips